All stories
Yapay Zekâ

AI designed an analog synthesizer from scratch

AI designed an analog synthesizer from scratch

The question of how far AI can go in hardware design was tested this time with a real analog synthesizer project. An engineer used Claude Opus 5.5 and Claude Code to have an MCU-controlled synthesizer designed, in order to test the jump in spatial reasoning and engineering ability claimed for models released in September 2026. According to the report, OpenAI also showed a circuit board designed by Astra in its announcement; the author tried a similar approach in his own project.

The design process started from an empty project folder and a fresh git repository. He pointed the agent first at JLCPCB's free parts list and asked what could be built from it. After a few boring suggestions, the project settled on an analog synthesizer with touch keys on the board, running on a CH32V00x microcontroller. The model then proposed a chain made of a Juno-style digitally controlled oscillator, a Moog-style transistor ladder filter and a voltage-controlled amplifier.

The author's approach is built on avoiding trial and error when working with models. He says generating each layer in one go from a complete specification works much better than editing it piece by piece. So the agent designed the circuit, simulated it with ngspice and wrote a simulation report. According to the article, the model corrected parts of the initial design based on the simulation results. To simulate the whole synthesizer, a behavioral model was also built in Python and calibrated against the ngspice results; the audio examples were produced with this model.

The author admits he has limited experience with analog synthesizers and says some of the design choices surprised him. He reviewed the circuit in detail but made no changes. Because the parts options were limited, the design relies heavily on components that would also have been used in the 1970s. To him, that is a fitting result for an analog synthesizer anyway.